Mitr0, a professional Fortniteplayer has made a name for itself since June 2018, when he began participating in online tournaments. He has been playing Fortnite since June 2018, when he joined forces with Mongraal. They placed 6th in the Fortnite World Cup Duo Championship. He hasn’t changed much since that time. He still grinds 10-hours+ daily and takes part in online events even though it doesn’t usually stream. We have given an overview below of mitr0’s peripheral setup. This will help him to stay at the top.
WHAT MANITOR DOES MITRE0 USE
Mitr0 has an Alienware 25AW2521H Monitor. This monitor was donated by Alienware. The monitor can refresh at a high rate of 360Hz @ 1ms. (GtG). The flat screen is equipped with LED backlighting and has a brightness of approximately 400 cd/m2 (typical), at a pixel pitch 0.282929 mm by 0.2802mm. NVIDIA Gsync technology is one of the many technologies that it offers. This helps reduce screen tearing, stuttering and improves gameplay. You will also find many connector and input ports.
Its stand is also highly adjustable. The monitor can tilt -5deg21deg and swivel -20deg20deg. Height adjustment ranges from 42.1 to 52.6 cm (16.5820.71’’) to pivot 90deg. For wall mounting compatible with VESA, the monitor can be taken out of its stand. The overall dimensions of the monitor are 55.6×25.2×52.6 (21.9×9.9×20.7”) and 8kg (17.57lbs) when it is stacked on its stand. You should note it only works with Windows 8 32-bit or later.
WHAT MOUSE DOES MITR0 USE?
Mitr0 uses the Logitech G Pro wireless mouse. You can add or delete two buttons from either side of the mouse. There are options for either 6, or 8, macro buttons, which allow you to accommodate as many as 5 profiles on the mouse’s board. This button is compatible with all types of grips and measures 3.82×62.15×11.66cm (1.57×2.5×4.92″).
The newer models include a Hero25K optical sensor, which provides 100-25,000 DPI. It can also be adjusted through the software in increments 50. The DPI button can be attached to up to six profiles. At a maximum speed of 400 IPS, the sensor can be tracked at a maximum acceleration rate of 40G. The sensor also has adjustable reporting rates of 250Hz, 125Hz or 500Hz which can be set to the desired settings. Its LIGHTSYNC technology allows RGB lighting to sync with other Logitech products via its HUB software. This device is compatible with Windows 7 and macOS 10.11, and it weighs only 79g (2.75 oz.).
WHAT MOUSEPAD DOES MITR0 USE?
Mitr0 uses the BenQ Zowie GSR SE mousepad. It measures 48x40x0.4cm (18.9×15.7x 0.14″) and is mounted on a rubberized bottom to stop it from sliding during use. It also features an even surface that ensures the mouse tracks smoothly and glides easily. There are many options, but mitr0 chose the Depp Blue.
WHAT KEYBOARD DOS MITR0 USE
Mitr0 uses the Glorious Modular keyboard (GMMKTKL-BRN). The keyboard is plug-and play and features Gateron Brown switches. They have an actuation force 35gf, an actuation point 2.65mm, and give a soft and tactile feedback. These switches can easily be swapped for compatible 3-pin switches, such as Cherry MX and Kailh switches. The switches have a sandblasted aluminum frontplate. They also feature raised ABS keycaps for double-shot injection.
There are 6 lighting effects that you can adjust using the double function features of the navigation keys. Although it does not have dedicated macro keys, macros can be created through the software. The overall dimensions of the device are 44x13x3.6cm (17.32×5.08×1.41”), and its non-detachable length is 1.83m (6ft.). Braided cable This cable is compatible with Windows XP and Vista as well as Mac OS and Linux.
WHAT HEADSET DOS MITR0 USE?
Mitr0 uses the Logitech G633 headset. It is wired and closed-backed with 50mm Pro G hybrid mesh drivers. The drivers have a frequency range from 20 to 20,000Hz and a nominal impedance 39 O. 7.1 Dolby Surround sound headset. They are multi-platform-compatible. You can upgrade to DTS:X2.0 Surround Sound with the Logitech G Hub Software, but this only works on Windows 7 64-bit.
Apart from the steel slider, it is primarily made of plastic. The headband and earcups are cushioned using sports mesh padding. You can remove the earcup padding for hand washing. There are three G-buttons programable on the earcup, and audio controls. They come pre-set to have lighting and equalizer profiles. The dual-source audio connector allows for simultaneous connection to up to two devices. It allows you to talk on your smartphone while playing games.
It also has a flip-up boom mic with unidirectional pattern. The frequency range it provides is impressive at 100 to 20,000 Hz. It should be noted that mitr0 does not use it, as he uses a separate microphone.
WHAT MICROPHONE IS MITR0 USE
Mitr0 uses the Blue Yeti microphone. It is an easy-to-use, plug-and-play USB mic that works at a side address. The unique feature of the Blue Yeti microphone is that it has three 14mm condenser caps, which allow you to choose from four different polar patterns. These can be switched between using the directional knob at its base. There are four patterns available: stereo, cardioid and bi-directional. The frequency range of the device is 20 to 20,000 Hz. It operates at 16 O impedance and 120dB maximum SPL. 1kHz @ 1Pa.
You can also use the on-body controls to adjust volume, sensitivity and mute. The desk stand can be detached and it is compatible with Windows 7 and later and macOS 10.10 and later as well as Xboxes, PS4s.
Professional Fortnite player mitr0 has been playing since June 2018, winning multiple tournaments. Mitre has made his name since June 2018, when he began participating in online tournaments. He still grinds 10-hours+ daily and takes part in online events even though it doesn’t usually stream.