A deep look at Tru3Ta1ent’s gaming setup

Tru3Ta1ent, a Dead By Daylight streamer, has been online since 2015. At the time, he was primarily playing Rocket League and then moving to various content. He hasn’t looked back since discovering DBD June 2016 and has seen steady growth in his following over the years. His ability to interact with his followers and give useful tips is what makes him a popular choice. We have listed below the components of Tru3Ta1ent’s gaming set. This is because his content relies on quick responses.

WHAT MOUSE DOES TRU3TA1ENT USE?

Razer DeathAdder V2 is used by Tru3Ta1ent. Razer DeathAdder V2 features the Razer Focus 20L optical sensor. This provides 100 to 20,000 dots per inch. You can set the dpi in increments 50 using the software. The mouse has the ability to store up 5 levels at once. The mouse can achieve speeds up to 650 IPS and a maximum acceleration speed of 50G.

The assigned button can be used in combination with the tactile scrollwheel to adjust the polling rate on the fly. There are 8 buttons that can be programmed, which include the right and left clickers as well as the serrated scrollwheel, right and left buttons, the two dpi button under the scroll wheel and two buttons on the sides. The power button is located under the scroll wheel. You can store up to five macro profiles onboard.

Its rubberized side grips and thick 100% PTFE feet of 0.8mm give it greater control. The 2.1m (7.5 ft) length of the cable allows for flexibility and drag-free operation.

Amazon View

What KEYBOARD IS TRU3TA1ENT USE FOR?

A Razer BlackWidow elite keyboard is used by Tru3Ta1ent. Razer BlackWidow Elite, a full-size wired mechanical keyboard with secondary functions and fully programmeable keys thanks to Razer Hypershift technology. The keyboard is made from plastic and has a metal top. It comes with Razer Green (Tactile & Clicky), Yellow (Tactile & Silent), or Orange (Tactile & Silent) switches, and a swappable ABS keycap. The polling speed is 1,000Hz @ 1ms.

It also integrates with cloud storage, hybrid on-board memory, and a removable, ergonomic wrist-rest. In the upper right corner are media controls, including a USB 2.0 port and a 3.5mm passing port. There is also RGB lighting. The dimensions of the device are 23.27×44.6×4.24cm (9.16×17.65×1.67 ”.)).

Amazon View

What HEADSET DO TRU3TA1ENT USE?

Tru3Ta1ent used Beyerdynamic DT90 Pro headphones. Tru3Ta1lent uses the Beyerdynamic DT 1990 Pro special edition headphones. These headphones are professional-grade and are suitable for broadcasting or production. These earcups are equipped with dynamic Tesla 45mm drivers, which provide an excellent frequency response of between 5 and 40,000Hz with an impedance level of 250. The result is a spatial, clear audio experience that spans all frequency ranges.

The sturdy structure is made of titanium-coated acoustic fabrics and precision-woven textiles, with cups and end pieces. They are 370g (9.52 oz). They are lightweight at 370g (9.52oz). Two cable options are available, as well as a spare pair of earpads. They also come with a carry bag. Nearly every component can be replaced.

Amazon View

What MICROPHONE IS TRU3TA1ENT USE FOR?

Shure SM7B microphone is used by Tru3Ta1ent. The Shure SM7B dynamic microphone is high-end and large-diaphragm. It has a frequency range from 50 to 20,000Hz, an impedance 150O, and a sensitive of -59dBV/Pa. The microphone has an unidirectional, polar pattern and an end-address that blocks out any unwanted background noises. This is why close-range applications are required to pick up the input clearly.

The base is made from steel and enamel aluminum. It also features a presence booster on the bottom, a high pass filter switch, and presence boost. The internal pop filter prevents any plosive sound from interrupting the recording. It also has an external windscreen that can be removed to stop interference from mechanical or electronic sources. The unit also includes a lockable yoke mounting.

Amazon View

What MIXER IS TRU3TA1ENT USED?

Tru3Ta1ent utilizes a TC Helicon GoXLR mixer. It is a popular combination that can be found in streams such as those at CallMeCarsonLIVE and Pengu, and other features like Aydan and Aydan. Therefore, it is not surprising that this combination should also be found in Tru3Ta1lent’s gaming system.

The compact mixer can be used to connect one headset and either an XLR microphone or one TRS/TRRS/TRRS mic at once. You can control your microphone, music and chatting using the sliders on the left. Each slider has its own mute button. You can use the controls to record sample audio and vocal effects like pitch echo or gender-bending in the upper right. They can also be used during live broadcasts. You will also find a mute/bleep button in the bottom left corner.

Amazon View

Faqs

WHAT HEADSET DOES TRU3TA1ENT USE? Tru3Ta1ent uses Beyerdynamic DT 1990 Pro headphones. Tru3Ta1lent’s gaming setup includes the special edition grey version of the Beyerdynamic DT 1990 Pro headphones. They are high-end headphones that are intended for professional use such as production and broadcast purposes.03-Feb-2021

Technoblade has chosen to use the Sony MDR7506 to give him the edge in his Minecraft worlds and battles. The Sony MDR7506 is a large-diaphragm Headphone that is wired with a 3.5mm jack.

wired Logitech G413 mechanical keyboard

What Keyboard Does GeorgeNotFound Use? GeorgeNotFound uses the Corsair gaming K95 Keyboard.29-Oct-2021

For streaming, TommyInnit uses the Logitech C922.09-Sept-2021

wireless SteelSeries Arctis 7

Conclusion

Dead By Daylight streamer Tru3Ta1ent has been streaming since 2015, mainly playing Rocket League, then moving to various content. He discovered Dead By Daylight June 2016 and saw steady growth in his following over the years. His ability to interact with his followers and give useful tips is what makes him

Leave a Reply

Your email address will not be published. Required fields are marked *