How to Root Cubot Note 20 Pro and Install TWRP Recovery 3.4.0

If you are a Cubot Note 20 Pro smartphone owner and also want to customize this rugged smartphone, then you have visited the right site. If you want to root and flash TWRP Recovery 3.4.0 to your device, follow our guide.

Cubot Note 20 Pro has Specs Mediatek MT6771 Helio P60 chipset, CPU/Octa-core processor (4x 2.0 GHz ARM Cortex-A73, 4x 2.0 GHz ARM Cortex-A53), GPU ARM Mali-G72 MP3, 6.5″ HD+ display, 720P (1600*720), 266ppi, 16M color, color saturation (NTSC) 90%, 2.Incels 5D, high contrast ratio 1300:1 (typical), brightness 450 cd/㎡, internal memory / RAM 128GB 8GB RAM, Sony IMX486 main camera, 4 camera sensors, 12MP, 20MP (depth sensor), 2MP (macro), 0.3MP (wide angle), 7.99 MP, Li-Ion 4200mAh battery, removable.

If you are an Android lover and want to install and root TWRP Recovery on your beloved device, then you have landed on the right page. In this article, we will walk you through the process of installing TWRP and rooting the Cubot Note 20 Pro.

TWRP offers an attractive hardware design and user interface (UI). If you follow this guide, you will be able to install the latest version of TWRP for Cubot Note 20 Pro. You can download TWRP Recovery from the links in the sample section of this article. Please note that this is an unofficial TWRP recovery and only for the Cubot Note 20 Pro (Confirm the model by going to Settings>About). The process described below is only for rooting and installing TWRP on Cubot Note 20 Pro, do not test this method on other devices.

If you want to unleash the full potential of your Cubot Note 20 Pro hardware, the main problem is to root and flash TWRP. Exchange ROMs often have limited and unsupported customization options. If you have a rooted device and a flashed TWRP recovery, you can install any custom ROM, modules, kernels, Xposed, etc, as well as many applications that require access with superuser privileges to function properly.

relevant website

How to install root and TWRP recovery on Elephone P9000

ALWAYS remember how to root the Infinix Smart 3 Plus X627 and install TWRP Repair.

2. July 2018

Brief information and benefits of TWRP recovery

TWRP (Team Win Recovery Project) is a community and open source development project. Flashing TWRP allows you to install any firmware on your device, boot your smartphone, modify zip files for settings, Xposed modules for settings, root and uproot with one click. You can also make a full backup of Nandroid and restore it later, flash the image file with one click, remove bloatware, overclock and underclock. With TWRP, you can easily erase, cache and clear data after flashing an image file to reflect changes and correct minor errors caused by caching.

To install TWRP, your Cubot Note 20 Pro phone must have an unlocked bootloader. This means that you first need to unlock the bootloader to root the device, and also perform a configuration.

Denial: Although AndroidWeblog.com covers everything very clearly so that our readers get exactly what they want, there is always a small chance that major problems may arise from the steps listed here. It is therefore in the user’s interest to carry out the steps very carefully in order to avoid accidents with the device.

Rooting and flashing a custom ROM will undoubtedly void your device’s warranty, and AndroidWeblog.com cannot be held responsible for invalid warranties or tinkered with devices.

Condition

Check the model number, which should be as follows:

  • Cubot Note 20 Pro (runs on Android 10 OS)

You should make sure you read the disclaimer carefully before transferring your phone and agree to act at your own risk.

NEVER forget how to root a J3 head and install TWRP recovery

Your phone must be 70% charged, otherwise complications may occur during the experiment. Don’t take any chances and charge it fully.

If you plan to root your phone or install a custom ROM, it’s a good idea to back up your phone. Back up all your media like photos, videos and everything on your PC, as well as your contacts to the cloud.

You must enable the USB debugging option by going to Settings, Apps and Development Options.

Downloads for Note 20 Pro Root Cube on Android 10

Download MediaTek USB VCOM drivers here (MT6xxx_USB_VCOM_drivers. zip)

Download TWRP recovery for Cubot Note 20 Pro here:

TWRP Recovery 3.4.0

Download SuperSU from Chainfire from here.

Download Magisk Manager from here.

Download the latest version of SPFlash Tool for Windows here.

Steps to flash/install TWRP Repair 3.4.0 on Cubot Note 20 Pro (Android 10)

Step one: Start uploading all the files listed in the required section above.

Step two: Browse the downloaded files, then right-click and extract the archived file MT6xxx_USB_VCOM_drivers. zip. Then navigate to the unzipped folder and click on the InstallDriver.exe file. This will install a VCOM preloader on your system.

Step three: Assuming you downloaded SP FlashTool (Win) from the link above, click on the archive and unzip it. Then display and run the flash_tool.exe file.

Step four: Find the broadcast file in the TWRP zip file you downloaded. Rename the TWRP file (.img) to recovery.img. Now navigate to the flash tool interface and select the scatter file from the extracted stock ROM folder (Download Stock ROM for your Cubot Note 20 Pro Smartphone).

Step 5: At this point, leave the recovery as a ticket/check. Now on the Location tab, click on the Storage Location field and locate the device-specific recovery image file (as shown in the figure above). Then click on the Download button.

Step six: Now connect your Cubot Note 20 Pro to your computer via the USB port. When you connect your smartphone, the flashing process starts automatically and lasts only a few seconds.

Seventh step: At this point in the user recovery process, your device has been flashed. You can now disconnect the device from the computer. Now you need to power on/down your device to restore TWRP. To do this, start the device by pressing and holding the volume up button. Note that the key combinations may vary depending on the model of the device. You can confirm the correct key combination for your Cubot Note 20 Pro. The Louder key also launches bootloader mode on some devices, which has a menu to switch to recovery mode. You can use the Volume Up and Volume Down keys as a key combination. That’s it, you have successfully configured TWRP on your Cubot Note 20 Pro.

ALWAYS BE CERTAIN that Max root cube and TWRP Restore are installed

Procedure for rooting the Cube Note 20 Pro/installing Magisk or SuperSU

Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article). Then continue with the next steps.

Warning: You can use Magisk Manager or Super SU, but only one, so choose wisely. Go to Magisk Manager if you are not sure.

Step one: Transfer the downloaded SuperSU.zip or magisk.zip file to the internal memory / SD card of your Cubot Note 20 Pro smartphone.

Step two: Just get started on the recovery. You can also make a ROM backup via the TWRP interface. However, I recommend that you make a backup copy of the ROM. Because if the process fails, you can flash the ROM.

Step three: Press Install, then navigate to the SuperSU.zip or magisk.zip file and drag the firmware confirmation file (located at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds.

Congratulations, you’re now rooted on the Cubot Note 20 Pro and you’ve also mastered TWRP. Now you can install Xposed Framework and customize your smartphone as you like. If you want to check it, you can download and check the root status through the Root Checker application.

Leave a Reply

Your email address will not be published. Required fields are marked *