We couldn’t create a new partition error on Windows 10

As you might be aware, Windows 10 is the newest version of Windows and is the direct successor to windows 8.1. Windows 10 comes with a ton of new features including Cortana, a new start menu, windowed apps and much more. Windows 10 also has a new feature which is disk management, unfortunately this has had a lot of problems since the early builds of windows 10.

Every time this error pops up on your screen, it’s in connection with a potential problem with the computer, usually with one or more of the hard drives. To help you identify which hard drive the issue is, you’ll need to have a bit of information. The error message itself gives you the drive letter, so you know which one to work with. (The drive letter is the one that tells you which one is being referenced.) If this is your primary drive, you’ll need to back up all of your data and then reformat the drive. This will erase all of your data, so make sure you back it up first. Blog Intros:  In the article below we will

If you are installing Windows 10 from a USB flash drive, you may encounter this problem if you are using a USB 3.0 flash drive.

According to users, there seem to be issues with USB 3.0 flash drives, and many users are advised to use USB 2.0 flash drives when installing Windows 10.

You can also create a bootable DVD of Windows 10 and use it instead of a USB drive.

3. Disconnect all additional USB storage devices

If you want to install Windows 10 from a USB drive, the error message We could not create a new partition may appear if more than one USB drive is connected to the computer.

To avoid this problem, we strongly recommend that you disconnect all additional USB drives and leave only your Windows 10 USB drive connected.

4. Reconnect the USB stick

To eliminate the error message We could not create a new partition while installing Windows 10, some users recommend disconnecting the USB drive.

If you get an error message, disconnect the USB storage device and connect it to another port.

Check if you can create a new partition. If the operation fails, disconnect the USB flash drive again and connect it to the original USB port. Try creating the partition again.

5. Set the hard disk as the first bootable device

When you install a new operating system from a USB flash drive, you will probably set this device as the first boot device of the BIOS.

Run a system check for errors

Press Start Scan to check for Windows problems.

Press Repair Everything to troubleshoot proprietary technology.

Run a PC scan with Restoro Repair Tool to find errors that cause security problems and slowdowns. Once the scan is complete, the recovery process replaces the damaged files with new Windows files and components.

Unfortunately, during Windows 10 installation, your USB drive is sometimes mistaken for a hard drive, resulting in the error message We could not create a new partition.

To solve this problem, you need to set the hard drive as the first boot device in the BIOS.

Then insert the bootable USB drive and restart the computer.

While the computer is booting up, you should press F10, F11 or F12 (depending on your motherboard, this may be a different key) and select your USB drive as the boot device.

The installation process should now be smooth. Note that the boot menu may not be enabled by default on your computer, so you will need to enable it manually through the BIOS.

Refer to your motherboard manual for detailed instructions.

6. Use Rufus or another program to create a bootable USB flash drive.

According to users, problems with the error message We could not create a new partition can be caused by the media creation tool.

Users reported that the problem could be solved by using a third-party utility like Rufus instead of Media Creation Tool to create a bootable USB disk.

7. Converting a partition to GPT format

  1. Start the command line and type diskpart.
  2. Now enter the list of disks. Locate the hard drive where you want to install Windows 10.
  3. Now enter the Select X drive. Replace X with the number that corresponds to your hard drive. If you have two or more hard drives, it is very important that you choose the right one, so be very careful.
  4. At the prompt, type clean and press Enter. This command deletes all files on the hard drive. So make sure you choose the right hard drive and back up your files.
  5. Now type convert gpt and run this command.

MBR partitions have certain limitations and can only work with drives smaller than 2TB.

GPT has no such limitations, it works better with UEFI, so it is usually the best choice.

Note that when converting a disk from MBR to GPT, all files are erased. So make sure you backup all important files before proceeding.

Diskpart is one of the oldest methods of converting an MBR disk to GPT. Despite its effectiveness, it deletes all your files.

Fortunately, Microsoft has introduced two new methods to convert MBR to GPT without losing files: MBR2GPT and gptgen.

Both of these tools are command line tools and if you want to use them, you must first run Command Prompt before starting Windows 10 and running either of these commands.

We have explained the use of both commands in detail in our guide to converting MBR disks to GPT disks and we highly recommend you read it for detailed instructions and other solutions.

How do I fix a new partition error for Windows 10 SSD?

Disconnect other hard drives

Many users report the error message We could not create a new partition when trying to install Windows 10 on an SSD.

To solve this problem, users say you should disconnect all other hard drives and leave only the SSD connected.

You can also try disabling all other hard drives except the SSD in the BIOS.

Once you have unplugged or disconnected all other drives, the SSD should be detected by the installer.

All you have to do is delete all the partitions on your SSD and Windows 10 should install without any problems.

We weren’t able to create a new partition error message that can prevent you from installing Windows 10, but as you can see, you can easily fix it by following one of our solutions.

Still having problems?
Repair them with this tool:

  1. Download this PC recovery tool with excellent reviews on TrustPilot.com (download starts on this page).
  2. Click on the Start Scan button to scan for Windows issues that may be causing the PC problems.
  3. Click Repair All to fix problems with patented technology (exclusive discount for our readers).

Restoro was downloaded by 0 readers this month.

This source has been very much helpful in doing our research. Read more about can’t create partition in unallocated space and let us know what you think.

Frequently Asked Questions

How do you fix we couldn’t create a new partition or locate an existing one?

This error message is often caused by the fact that you have limited space on your hard-drive, and the partition you are trying to create will not fit on your C: drive. The partition must have enough space to save your files. To fix this error message you will need to create a new partition on your hard-drive. To do this, you will need to create a new partition on your external hard-drive. Last night I was messing around with my computer and accidentally dropped it. I thought the hard drive had died, but after leaving it overnight I found that it had still been running. After a bit of research I found that I had deleted the operating system partition, and was left with a small partition with a bunch of other files. I then set about trying to fix this, and after a lot of searching for answers, I found an article that told me to delete the partition and recreate it, which I did and the computer booted up fine. I thought I would share this in case anyone else had this problem, as I had seen a similar problem on throwdowntv, and the guy was unable to fix it.

How do I fix setup was unable to create a new system partition?

Windows 10 is still very new so if you’re having problems with it, you’re not alone. In this article, you’ll discover how to fix that error message that was unable to create a new system partition in Windows 10. This is a common Windows error message that you may see on your device, and one that can be difficult to pinpoint without the help of a professional. In most cases, this issue is caused by faulty hardware, and it is recommended that you connect your device to a computer to update the drivers to the latest version.

How do I fix a partition error?

The TH2 file system, also known as NTFS, has been the default file system for Windows for a long time now. However, it is not without its faults. One of the biggest is the dreaded Partition Error, which causes an error message to appear saying “we couldn’t create a new partition.” Thankfully, however, this error is relatively easy to fix. Partitioning is a vitally important component of any operating system, and this is especially true for Windows XP, which relies on partitions to separate the operating system files from your personal data and installed applications. When these partitions aren’t created correctly, or when they are damaged in any way, your computer may experience strange problems ranging from a blue screen of death to slow startup and shutdown speeds. The good news is that partition errors are often easy to fix, especially if you have a backup of your system on an external HDD, which you can just plug in and use to restore the disk to its original state. This approach will usually fix any partition problems and restore your computer to full functionality.

Related Tags:

partition error 0x80070017create partition primary sizeunable windows systemfixed mbr diskinstall windows 10 on efi systemexternal hard drive cannot create partition,People also search for,create partition primary sizedrive 0 unallocated space errorpartition error 0x80070017windows 10 setup log filesexternal hard drive cannot create partitionwindows can only be installed to gpt disks,this partition is too smallcreate partition primary sizedrive 0 unallocated space errorpartition error 0x80070017we couldn't create a new partition redditexternal hard drive cannot create partition,this partition is too smallcreate partition primary sizepartition error 0x80070017windows 10 setup log filesunable windows systemexternal hard drive cannot create partition,Feedback,cannot partition hard drive windows 10windows setup partitionswindows 7 install partitionunable windows systempartition error 0x80070017external hard drive cannot create partition,this partition is too smallcreate partition primary sizeerror 0x00701b1windows install cannot partitionwindows 7 install partitionselected disk is not a fixed mbr disk,error 0x00701b1partition error 0x8004240fmac we couldn t create a new partitionthe selected disk has an mbrdiskpart create partitionpartition error when installing windows 10,Privacy settings,How Search works,3:43(Resolved) We Couldn't Create A New Partition Or Locate An …Windows 10 FixYouTube – Dec 26, 2017,3:43,(Resolved) We Couldn't Create A New Partition Or Locate An …,Windows 10 FixYouTube – Dec 26, 2017,Windows 10 Fix,YouTube – Dec 26, 2017,2:15Fix "We couldn't Create a new partition or locate an existing one …DEE ZYouTube – Jan 14, 2020,2:15,Fix "We couldn't Create a new partition or locate an existing one …,DEE ZYouTube – Jan 14, 2020,DEE Z,YouTube – Jan 14, 2020,5:25we couldn't create a new partition or locate an existing one windowskottakkal ITYouTube – May 1, 2020,5:25,we couldn't create a new partition or locate an existing one windows,kottakkal ITYouTube – May 1, 2020,kottakkal IT,YouTube – May 1, 2020,See more,we couldn't create a new partition error 0x80042468,can t create partition or locate existing one when installing windows 10,we couldn't create a new partition or locate an existing one server 2012,can't create partition in unallocated space,windows 10 installation partition error,we couldn't delete the selected partition error 0x8007045d,ارور we couldn't create a new partition

Leave a Reply

Your email address will not be published. Required fields are marked *